Trevi XF 300 Guia Del Usuario página 6

ENGLISH
TRANSPORTATION
To carry the device can use the handles (18) by pulling them from the cabinet.
POWER
This unit works with rechargeable Lithium battery.
1. The charger is not included in the accessories. Please use the universal 5V/1A charger to charge this devices. Put the provided charge cable into
the charging jack, connect the other end to the charger,the charging indicator beside the LED screen will keep lighting.
(When playing music during charging, please put the volume to middle,because for some music with heavy bass, the charger may can not afford
the high current temporarily under the maximum volume)
2. Charge time should be 4-6 hours. When charging full, the indicator light will switch off.
3. To prolong the life of battery, DO NOT CHARGE CONTINUOUSLY FOR LONGER THAN 8 HOURS.
Lamp status LED charging:
- RED LED light fixed: with the device switched off or in use indicates that the battery and 'being charged.
- RED LED indicator off: with the device switched off or in use indicates that the charging process is complete, the battery is charged.
Caution:
- Do not connect the appliance to sockets with a voltage other than that indicated.
- Do not use cables other than the supplied one.
BASIC FUNCTIONS
POWER ON/OFF
Press the main switch ON/OFF (10) to position ON to turn the power.
Press the main switch ON/OFF (10) to position OFF to switch off.
MODE SETTING FUNCTION
To change the mode function, press more 'times the MODE key (5) to select RADIO (display show the frequency), BLUETOOTH (the display "Bt"),
USB (only if the USB socket (12) is connected to a memory, the display shows "Lod" for a few seconds), SD (SD only if the slot (7) is connected
to a memory, the display shows "Lod" for a few seconds), AUX (only if input Aux-in (14) cable is connected stereo Jack/Jack 3.5mm supplied the
display shows "Aux").
ADJUSTING THE VOLUME
1. Turn the volume VOL. (9) to increase or decrease the overall volume of playback.
2. Turn the MIC VOL (16) to adjust the volume level signal inputs MICROPHONE (11) (13). The adjustment acts on the two inputs simultaneously
SETTING BASS TONE
Turn the knob BASS (8) to adjust the bass.
ECHO EFFECT
Turn the knob ECHO (15) to increase or decrease the echo effect on the inputs MICROPHONE (11) (13).
Note: the echo only works on microphone inputs.
FUNCTION RADIO FM
Under FM radio state, the audio cable provided treat as antennal. Please insert the audio cable to get best FM signal before using.
AUTO MEMORY
1. Turn on the unit and press repeatedly the MODE key(5) on unit and select RADIO function (the display will show the frequency).
2. Press (4) button on the unit to activate the auto memory (the radio starts an automatic search radio stations and saves them automatically).

The station's number stored depends on the radio signal in your area. During the search, press
3. Use the :(3) and 9(2) buttons to listen to the various radio stations saved in memory.
BLUETOOTH OPERATION
1. Turn on the unit and press the MODE(5) button to select the Bluetooth function, the display shows "Bt".
2. In Bluetooth mode, the "Bt" on the display (9) will light up, you will hear two beeps, the system automatically enters search mode.
3. Activate the Bluetooth feature on the external device to be coupled.
4. Initiate a search for devices. After select the "XF 300". 5. Enter the password "0000" if required.
6. Press  (4) button to start playing and :(3) and 9(2) buttons for change the songs.
PLAY ON INPUT USB/SD
1. Turn on the unit.
2. Insert a USB memory or an SD card into the USB(12), SD(7) slot. Playback starts automatically.
3. To pause playback, press the key
4. To resume playback, press key
5. Press :(3) button to switch to the next track. Press 9(2) button to swicth to the previous tracks.
6. Press and hold the buttons :(3) or 9 (2) to quickly search for a particular piece of music. Release the button to resume normal playback.
Note:
(4), the display will show the icon

(4).


.

6
XF 300
(4) button to stop recording.