Possible causes of faults, and their remedies
Problem
Multi-switch fails to switch
Multi-switch operates, but no
associated picture appears
Picture shows pixels whilst
another receiver is changing
over
Technical Specifi cations
Type
Part no.
Subscriber connections
Inputs
Frequency ranges
Connection loss, terr.
Gain to the subscriber connection (SAT)
Adjustable attenuator setting range (SAT, 1 dB steps)
Horizontal/vertical isolation
Operational level
Subscriber frequency/SCR address
Screening factor
Permissible supply voltage at the subscriber output
Max. power consumption
Max. remote feed current
Permissible ambient temperature
Connections
Dimensions (W x H x D)
Packing unit/weight
Electronic equipment is not domestic waste; it must be disposed of properly in accordance with directive
2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27 January 2003 on waste
electrical and electronic equipment. At the end of its service life, please take this device to a designated
public collection point for disposal.
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P.O. Box 100 444 • 83004 Rosenheim • GERMANY • phone +49 8031 184-0 • Fax +49 8031 184-306
Possible cause
No control signal or
wrong control signal
from receiver
Incorrect input cable
frequency
Voltage at LNB too low Use distributors with no diodes in conjunction with ESU 33/34.
Receiver 1
Receiver 2
Receiver 3
Receiver 4
Receiver 5
Receiver 6
Solution
Check that there are no short circuits in the connection from the
receiver to the multi-switch. Check the receiver menu settings
(single cable mode!). Operating voltage on receiver output should
not be greater than 14 V
Check menu settings of all connected receivers.
Check that frequencies are assigned to one receiver only
Connect an NCF 18 power supply unit to the option DC socket
1 x terr.
MHz
5-862
dB
1
dB
-
dB
-
dB
-
dBμV
-
MHz
dB
V
mA
mA
°C
mm
Items/g
936.3933/-/ZWT/0311/e - Technical data subject to change.
EXR 561/ECO
20510058
1 x 6
4 x Sat IF
950-2150
7 → 12
0-15
30
93
1284/0
1400/1
1516/2
1632/3
1748/4
1864/5
5-300 MHz > 85
300-470 MHz > 80
470-1000 MHz > 75
1000-2400 MHz > 55
12-14
190
200
-20 to +55
F connectors
162 x 148 x 43
1/350
-