Neck Loop/Auxillary Port; To Place Or Receive A Call - Walker Clarity Extra W1100 Guia Del Usuario

Neck Loop/Auxillary Port

The W-1100 has a 3.5mm phono jack to
use with a neck loop. The volume to the
neck loop is controlled with the Clarity
Power Control. When the neck loop is
plugged in, the receiver in the handset is
disabled.
Once you have installed your Walker
Clarity according to the instructions noted
previously, it will be ready to use.
Receive a Call:
1. Adjust the Clarity Control to its lowest
setting (zero).
2. Pick up the handset and listen for the
caller's voice or a dial tone. Watch the
green sound level light located on the
phone base, next to the program button.
It should sign steady.
16
OPERATING THE WALKER CLARITY
To Place or
3. When placing a call, dial as you would
any phone and wait for someone to
answer.
4. Press the Boost Button
5. Adjust the Clarity Power Control up-
wards to a level where the other party's
voice is heard loud and clear, and begin
conversation.
6. When you complete the call, return the
handset to the base unit.
7. After hanging up, the sound level will
reset to normal level.
8. Pressing the Boost Button during
subsequent conversations will return the
volume to your set sound level.
Note: If you made an error while dialing,
just depress the hookswitch, listen for a
dial tone, and dial again.
®
W-1100 Clarity Extra