Drive M-Rail Instrucciones De Instalación página 3

M-Rail installation instructions
Installing the M-Rail assembly onto the bed:
Installer quick tip:
You will find the installation easier if you remove the mattress.
M-Rail Low Profile
Installed on bed
base/bed frame
8. Slide the assembled M-Rail between the mattress and he bed base or bed frame support.
Low Profile
9. Run the Long Webbing (part 111) across the base/bed frame and underneath, back to the M-Rail.
10. Feed the Long Webbing (part 111) through the buckle (part 107) at the desired length. Close the buckle (part 107) to secure the strap.
11. Put the mattress back on the bed if you removed it.
12. Lie on the bed and position the M-Rail where it is most comfortable for you.
13. Tighten the two webbing straps securely against the base or bed frame, ensuring that the webbing straps are straight and parallel.
14. L oop and double tie the loose end of the Long Webbing (part 111) directly underneath the buckle ( part 107). Cut off the excess web-
bing of Long Webbing (part 111) to prevent tripping hazards.
M-Rail Low Profile
Installed with
Note: Mattress
to be added
E
M-Rail
A
B
A
B C
111
Mattress
M-Rail High Profile
Installed on bed
base/bed frame
Note: Mattress
to be added
M-Rail
High Profile
A B C
107
M-Rail High Profile
Installed with
Mattress
3
E
107
A
B C
111