Drive M-Rail Instrucciones De Instalación página 2

M-Rail installation instructions
Preparing the M-Rail for assembly:
1. Open the carton and remove all parts. Remove the plastic coverings and dispose of safely away from children and infants.
2. T he M-Rail can be used with either two (2) Cross Bars or three (3) Cross Bars. By choosing either the two (2) or three (3) Cross Bar
option you can adjust the M-Rail height relative to the floor and to suit the user's preference. For thick mattresses we recommend that
you use 3 Cross Bars. If you choose to use 2 Cross Bars, discard part D (H Bar).
Assembling the M-Rail:
B
A
3. S nap-lock part A into part B. Repeat
on other side
6. L astly, snap-lock part E onto either part D or part B. Make sure that all the Snap-Lock
Spring Buttons are in place.
Installer quick tip:
if using part D and you
experience any difficulty when you snap-lock part E into
place onto part D, loosen the screws 121 on part D using
the allen key provided.
7. Adjustments may be needed to tighten or loosen part D (H Bar) for proper fit. You are ready to install the M-Rail onto your bed.
B
A
4. S crew part C onto parts B. Leave
screws loose.
M-Rail
Low Profile
with 2 bars
A
B
A
B
C
A
B
A
B
E
M-Rail
High Profile
with 3 bars
A
B D
C
2
A
B
5. If you are using part D (H Bar),
snap-lock part D onto part B.
E
A B
C
A B
C