ION Tahiti Guia Del Usuario página 3

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Charging
For fastest charging, power off Tahiti
connect the speaker to (A) a USB power adapter (DC 5V 2A, not included) connected to a
power outlet, or (B) your computer (powered on).
TM
Tahiti
Speaker's battery life can also be prolonged between charges using the solar panel.
For best results, place Tahiti
sunlight a day. The rate of charging depends on the amount of sunlight the solar panel
receives. The unit will charge slower when receiving indirect sunlight.
Assembly
TM
Tahiti
Speaker may be used mounted using the included post;
freestanding; or hanging using the handle.
Pole Mounted:
1. Drive the entire spike portion of stake into the ground where you
would like to install Tahiti
Important: If the ground where you would like to install Tahiti
Speaker is hard or tough, use a shovel to loosen the soil prior to
driving the ground stake. To avoid damaging the stake, do not
directly strike it with a hammer. Instead, we recommend using a
rubber mallet or using a flat object as a buffer between the
hammer and stake.
2. Attach a pole segment to the stake, and then attach a pole
connector to the top of the pole segment. Add another pole
connector to the previous pole segment, and repeat until three
pole segments have been connected for each speaker, or until
the desired height is reached.
Note: To ensure stability, make sure all pieces are connected
together tightly. Do not apply downward pressure to the poles
to drive the stake into the ground.
3. When the pole segments are connected, add the threaded
tube cap on the top of the last pole segment. Place Tahiti
Speaker so that the hole at the bottom of the speaker is in line
with the threads at top of the pole mount. Gently screw Tahiti
Speaker onto the threaded cap until it is secure. Do not
overtighten.
4. Before attempting to move Tahiti
speaker from the pole mount first. Hold the top-most section of
the pole with one hand and gently unscrew Tahiti
until it is separated from the pole mount.
TM
Speaker and use the included micro-USB cable to
TM
Speaker in an area that receives at least 3 hours of direct
TM
Speaker.
TM
Speaker, always remove the
Ground
Level
TM
Pole
Connector
Pole
Segment
TM
TM
TM
Speaker
Threaded
Tube Cap
Stake
3
Tabla de contenido
loading

Tabla de contenido