Bialetti FMX05 Instructiones De Uso página 33

ASSEMBLY/USE OF THE CHOPPER GOBLET *
Warnings:
Make sure the handle/motor unit (1) is not
running before inserting or removing the
attachments, when cleaning it or when it is
not used.
• Mount the chopper blade (8) * on the chopper goblet stem (9) *, (Fig. F).
• Handle blades with care to prevent injury.
Insert the blade before food to be chopped.
• Cut food into small pieces (1.5 x 1.5 cm) and insert it into the chopper
goblet (9) *.
• Mount the chopper lid (7) * on the goblet (9) * so that the lower part of
the lid perfectly fi ts on the reference notch on the goblet.
• Press and rotate clockwise the chopper lid (7) * until it completely locks,
Fig. G.
• Make sure the upper part of the blade (8) * is properly inserted in the
apposite housing on the lid cover.
Before using the appliance, make sure the blade and the lid are
properly mounted.
• Position the handle/motor unit (1) on the chopper lid (7) * and rotate it
clockwise to lock it (Fig. H.
• Connect the plug (11) to the electrical socket, making certain that the
mains power corresponds to the indications on the tag on the back of
the appliance.
• Start the appliance by pressing the on/off button (2). Only after few
seconds, according to preparation and kinds of food, it is possible to
increase the speed by pressing the relevant button (3).
• The best performance of the appliance is achieved through a pulse
functioning by pressing the on/off button (2) for a very short time (2 - 3
seconds).
In case the appliance does not work, check the attachments are
properly inserted.
(*) Only in models with accessories included.
4. Use
33
EN