Selecting Temperature; Temperature Settings; Automatic Switch-Off - Bosch+Sohn bosotherm 3000 Instrucciones Para El Uso

3. Operation
3.1 Safety
This footwarmer is equipped with a SAFETY SYSTEM. This electronic sensor technol-
ogy prevents overheating of the footwarmer over its entire surface by automatically
switching off if a fault occurs. If the footwarmer is automatically switched off by the
safety system due to a fault, the indicator lamp no longer lights up even when the foot-
warmer is switched on. Please note that the footwarmer can no longer be operated if a
safety-related fault occurs and must be sent in to the specified service address.

3.2 Selecting temperature

The footwarmer heats up most quickly when you initially set the highest temperature
level (level 3). It can then be turned down again as required.
Of course, the footwarmer can always also be used while switched off, because its
'teddy-bear' plush will warm the user's feet even if there is no electrical outlet nearby.
We recommend switching on the footwarmer approximately 15 minutes before use to
achieve an optimum effect.
We recommend the lowest temperature setting for extended use of the foot warmer.

3.3 Temperature settings

Level: 0 Off
1 Minimum heat
2 Moderate heat
3 Maximum heat

3.4 Automatic switch-off

The foot warmer switches off automatically after approx.90 minutes,
The temperature display starts to flash or remains on even after
switching off (depending on the model). To switch on the foot warmer
again, first set to ‚0' , wait approximately 5 seconds and then select
the desired temperature setting. Switch off the foot warmer (setting ‚0')
or unplug it from the mains if you are no longer going to use the foot
warmer after the automatic switch-off.
8
90
min
STOP