Installation; Mounting The Pdu - Tripp-Lite AGPD7989 Serie Manual Del Propietário

3. Installation

3.1 Mounting the PDU

The PDU supports five primary mounting configurations: 1U Rack, 0U Rack, Wall,
Under-Counter and Reduced-Depth.
Note: Regardless of configuration, the user must determine the fitness of hardware and
procedures before mounting. The PDU and included hardware are designed for common rack
and rack enclosure types and may not be appropriate for all applications. Exact mounting
configurations may vary.
3.1-1
1U Rack Mounting: Use three
screws to attach each of the two
longer mounting brackets to the
PDU as shown. You can mount
the PDU in a recessed position by
attaching the mounting brackets so
they extend beyond the front panel
of the PDU. Mount the PDU in the
rack by inserting four user-supplied
screws through the mounting
brackets and into the mounting
rack rails.
3.1-2
0U Rack Mounting: Use three
screws to attach each of the two
shorter mounting brackets to the
PDU as shown. Mount the PDU
vertically by inserting two or more
user-supplied screws through
the mounting brackets and into
mounting points in the rack or rack
enclosure.
You may have to remove the
screws attaching the mounting
brackets to the PDU, change the
orientation of the brackets as
shown and reattach the brackets.
Use only the screws supplied by
the manufacturer or their exact
equivalent (#8-32, 3/16" flat
head). Attach the PDU vertically by
inserting two or more user-supplied
screws through the PDU mounting
brackets and into mounting points
in the rack or rack enclosure.
15-04-184-93341C.indb 5
3.1-1
3.1-1
3.1-2
3.1-2
5
4/16/2015 8:49:10 AM