Barrette Crossover product Instrucciones De Instalación página 8

15.
Using template from Step 4, mark the
location of screws on the side with hinges,
but on the bottom corner away from the
hinges (Fig. 25).
Using a ⁄ " bit, pre-drill pilot holes with
5
32
template. Secure gate corners together
using assembly screws.
8
16.
Check the entire gate installation for
accuracy before snapping the screw head
covers into place (Fig. 26).
(Fig. 25)
17.
Crossover Gate Kits are designed to
work with multiple Boerboel gate latches.
Install your selected gate latch per the
instructions included with your latch
hardware kit.
(Fig. 26)