USING THE X-POWER TO RECHARGE
WITH THE X-LINK CONNECTOR:
1. Place the 2 X-LINK connectors face to face (Smartphone and
X-bank)
2. The 2 devices connect to each other
3. The charging begins
4. After charging, remove the X-POWER from your smartphone
N.B.: the X-Link function can only be used with Crosscall products
equipped with this charging system.
USING THE X-POWER TO RECHARGE
A DEVICE VIA USB:
1. Connect your cable (not included) to the USB port
2. Connect your device to be charged
3. Charging starts automatically.
4. After charging, remove the USB cable
SAFETY AND USE OF THE BATTERY:
• Use with the correct charger
• Do not throw into fire
• Do not incinerate
• Do not short-circuit
• Do not expose to temperatures above 60°C / 140°F or direct
sunlight
• Recycle according to the standards in force