Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALL THE CHAMBERLAIN
®
The Chamberlain
Internet Gateway allows you to control your garage
door opener from your internet connected computer or smart phone. The
MyQ
®
Control Panel has been programmed at the factory to the
Chamberlain
®
Internet Gateway.
1 CONNECT THE CHAMBERLAIN
1.1 Connect the Chamberlain
ethernet cable. If you only have access to a Wi-Fi signal and not a
router, you must use a wireless ethernet adapter (not provided) to
connect to the internet.
1.2 Connect power to the Chamberlain
and green LEDs will blink momentarily and then the blue and green
LEDs will light solid.
2 CREATE AN ACCOUNT
From your computer, go to www.mychamberlain.com and follow the
instructions to create an account. Use a computer for this step; you
cannot create an account from a mobile device.
3 REGISTER THE CHAMBERLAIN
Locate the serial number on the bottom of the Chamberlain
Gateway. Register the Chamberlain
number. Your garage door opener will appear in the "Places" section of
your account when registration is complete. If the garage door opener
does not appear, follow step 4 below.
4 PROGRAM THE MyQ
®
CONTROL PANEL TO THE
®
CHAMBERLAIN
INTERNET GATEWAY
4.1 Click on "Manage Places>Add New Device>Garage Door Opener"
and follow the directions.
4.2 Once you click ADD you have 3 minutes to press the LEARN
button two times on the MyQ
will turn on.
4.3 The red learn LED will turn off when programming is complete.
The blue LED on the Chamberlain
indicate that a device has been programmed. Once the control
panel is programmed, it will appear on your screen and you can
then name the device (e.g., My Control Panel, etc.).
4.4 Click SAVE.
The control panel has now been programmed to the internet gateway and
the garage door can now be controlled from a computer or smartphone.
Follow the same steps to add other MyQ
DOWNLOAD THE SMARTPHONE APP
Visit the app store for your smartphone to download the MyQ
the app you can monitor and control your garage door opener and MyQ
devices. You can also add or remove other MyQ
TROUBLESHOOTING
After power up, the LED lights will show the status of the Chamberlain
Internet Gateway.
•
GREEN On Solid – The Chamberlain
address and is connected to the Internet.
•
GREEN flashing steadily On & Off – The Chamberlain
Gateway has an IP address, but is not accessing the internet.
Check your router settings and internet connections.
•
GREEN Off – The router is not providing an IP address to the
®
Internet Gateway. Check your router settings and
Chamberlain
internet connections.
®
INTERNET GATEWAY
®
INTERNET GATEWAY
®
Internet Gateway to a router with the
®
Internet Gateway. The blue
®
INTERNET GATEWAY
®
Internet Gateway with the serial
®
control panel. The red learn LED
®
Internet Gateway will light to
®
devices.
®
accessories.
®
Internet Gateway has an IP
®
1
Ethernet
Cable
®
Internet
2
www.mychamberlain.com
4
®
app. With
®
®
Internet
2
Router
Green LED
Chamberlain
®
Internet Gateway
3
Power
Adapter
Blue LED
Tabla de contenido
