Hkoenig GSX16 Manual De Utilización página 8

KIT CONTENTS
1 x Base with motor 1 x Bowl
1 x Feeder
1 x Screw-conveyor shaft 1 x Pusher
1 x Stainless steel strainer
1 x Juice container 1 x Pulp container 1 x Brush
1 x Instruction manual
Open the package and carefully take the appliance out. Make sure that the set is
complete and that its components are undamaged. Check that plastic parts are not
broken and the power cord is not damaged. If you find that any components are
missing or damaged, contact the vendor and do not use the product. Retain the
packaging or dispose of it in accordance with local regulations.
Caution! To keep children safe, do not leave any packaging parts (plastic bags, cardboard boxes,
expanded polystyrene elements etc.) freely accessible. Risk of suffocation!
USE
BEFORE FIRST USE
Unpack the appliance and remove all the elements from the packaging.
•
Make sure the power supply parameters of the appliance match the parameters of the local
•
mains.
Before operating the appliance for the first time, clean it and the accessories as described in
•
section 8 Cleaning and maintenance of this instruction manual
APPLIANCE ASSEMBLY
Before you start assembling the appliance, make sure that the power switch
is in the 0 position.
Disconnect the appliance from the power source.
Assemble the screw-conveyor shaft (3) and the stainless steel strainer (4).
Turn the screw-conveyor shaft and press it slightly downwards until it fits
into the relevant place. Put the components referred to above in the bowl
(5). Place the bowl on the base with motor (11), pressing the components
gently and rotating them as shown in the picture below.