Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
INSTALLATION - MOUNTING
has been designed for an indoor use.
UNIMPPT
It incorporates an external temperature sensor which adjusts the load voltage according to the ambient
temperature for an optimal load. It is recommended to instal the device near the battery.
The device has to be mounted on a solid, stable and dry appropriated flat surface.
Standard wiring
Close the cover by
Cables exit via the 2
Break the 2 caps of the cover
pushing upwards
orifices in the cover
with pliers
Wiring through a wall
Cables go through a
Break the cap off
Close the cover by
partition wall
pushing upwards
To provide the required air circulation needed for cooling the solar charge controller, let a 5-cm free
space (minimum) all around the device.
5cm
5cm
5cm
5cm
www.uniteck.fr
23/52
Tabla de contenido
