Fellowes POWERSHRED 99Ci Manual Del Usario página 4

PRODUCT MAINTENANCE
OILING SHREDDER
recommend you oil your shredder each time you empty your waste bin.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
2
1
*Apply oil across entry
Press and hold forward ( )
*Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
TROUBLESHOOTING
A B C
JAM PROOF SYSTEM*
Eliminates paper jams and powers through tough jobs
DISABLING THE FEATURE
2
1
Should you choose to disable the
Auto light is no longer
button (blue) and reverse (
)
repeat step 1)
D E
3
AUTO
Shredding can continue with the
and Remove Paper icon (
will illuminate
CLEANING AUTO-START INFRARED SENSORS
(Note: two paper detection sensors are located in the center of the paper entry)
TO CLEAN THE SENSORS
3
1
shredder
infared sensor
A. Overheat Indicator:
not operate for the duration of the recovery time. See Basic Shredding Operation for more information about
the continuous operation and recovery time for this shredder.
B. Bin Open:
C. Bin Full:
Use Fellowes waste bag 36053.
D. Remove Paper:
E. SafeSense Indicator:
®
and the shredder will stop shredding. If SafeSense
turn off and the user must press the power button on the control panel to resume shredding.
5 3 4
document is completely through
) the shredder
.
4
Dip cotton swab in
rubbing alcohol away any contamination
from the paper sensors
) and remove paper.
indicator will illuminate
®
®
5 3 5
6
If steps 4 and 5 do not clear
( ) briefly (repeat steps
4 and 5 until shredded)
and refeed
ENGLISH
Model 99Ci
5
4