Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Changing Optional Feature Settings
The controls for all the optional features are located on the Parents' Units. You only need to change the settings on
one Parents' Unit as the second one will automatically change as well.
To access the optional features, press the Menu button. You can toggle through the features by repeatedly pressing
the Menu button. A flashing symbol indicates that feature can be activated, deactivated, or adjusted by pressing the
Arrow buttons and then the Select button. The Parents' Unit symbol will also appear when you are changing settings
for the Parents' Unit. The Nursery Unit symbol will also appear when you are changing settings for the Nursery Unit.
NOTE: If you do not press the Select button after you have made your selection, the unit will revert to the previous
setting.
Sound, Movement, and "Tic" functions
After you press the Menu button, use the Arrow buttons to toggle between these three functions until you get your
desired combination. You can select one of the following five choices:
fig. 4
fig. 5
fig. 6
fig. 7
Movement & Sound.
This is the way your monitor is set from the factory. The Movement Sensor is enabled and
detects your baby's movements. The Sound feature is enabled so you will hear the alarm
and all of your baby's sounds, and see sound lights. For this setting, the Sound and
Movement symbols will appear (see fig. 4).
Movement, Sound, & "Tic"
The Movement Sensor is enabled and detects your baby's movements. The Sound and
"Tic" features are also enabled so you will be able to hear the alarm, your baby's sounds,
see sound lights, and hear a ticking sound as the Sensor Pad senses your baby's
movement. For this setting, the Sound, Movement, and "Tic" symbols will all appear
(see fig. 5).
Sound
The Movement Sensor is disabled but you will still be able to hear your baby's sounds and
see sound lights. Your Angelcare® works like a regular sound monitor when set to this
function. For this setting, only the Sound symbol will appear (see fig. 6).
Movement
The Movement Sensor is enabled and detects your baby's movements. If no movement is
detected, the alarm will sound on the Nursery Unit after 20 seconds. Your baby's sounds,
the movement alarm, and the ticking will not be transmitted to the Parents' Unit. For
this setting, only the Movement symbol will appear (see fig. 7).
16
Tabla de contenido
