Led Status; Getting Started; Starting To Use The Boomboom 577; Charging The Boomboom 577 - Marmitek BOOMBOOM577 Manual Del Usario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
3.4

LED status

Operation / State
Power on
Pairing mode
Disable
Charging indicator
Charged
Connection
No connection
Calls
Busy
Play music

4 Getting started

Please take the following steps before using the product:
x

Charging the BoomBoom 577

x
Activating the Boom Boom 577
x
Pairing the BoomBoom 577
We will now explain this step by step.
The text uses a smartphone as an example, but this can obviously be any device that
can play music via Bluetooth.
4.1

Starting to use the BoomBoom 577

4.1.1
Charging the BoomBoom 577
The BoomBoom 577 has a built-in rechargeable battery.
We recommend fully charging this battery before the first use. Connect the included
USB cable to the BoomBoom 577 and a PC, Mac or USB power adapter. The red LED
will light up.
Initial charging will take approximately 4 hours. Once the BoomBoom 577's battery is
fully charged, the red LED will switch off.
Note: While charging, the BoomBoom 577's Bluetooth function cannot be used.
4.1.2

Pairing Bluetooth devices

1.
Ensure that the BoomBoom 577 is switched off.
2.
Hold down the power button for 5 seconds to enter the BoomBoom 577's pairing
mode. Release the power button once the LED starts to flash blue/red.
Note: When powering on, the LED will first blink blue, then blue/red.
3.
Switch on your smartphone and go to: Settings > General > Bluetooth. Click
'Bluetooth' ON. 'BoomBoom 577' will appear on your smartphone. Click
'BoomBoom 577'. The smartphone is now connected and paired with the
headphones. Enter "0000" when your smartphone requests a pairing code.
6
LED Indication instructions
LED indication status
blue LED flashing
red and blue LED flash alternately
red LED on and then off
red LED on
red LED goes off
blue LED flashing
blue LED flashing
blue LED flashing rapidly
blue LED flashing
blue LED slowly on/off
method / result
press the power button for 2s
press the power button for 5s
press the power button for 4s
red LED on
red LED goes off
flashes every 3s
flashes every 2s
press the power button to accept
call
flashes every 0.5s
music is heard
© MARMITEK
Tabla de contenido
loading

Tabla de contenido