Led Status; Getting Started; Connecting To Your Tv Or Sound System; Pairing - Marmitek BOOMBOOM 50 Instrucciones De Seguridad

4.1

LED status

LED status
Blue LED flashing quick
Red/Blue LED flashing
Blue LED lit continuously
Blue LED flashing slowly
5

Getting started

Please take the following steps before using the product:
x
Connect the BoomBoom 50 to your TV or audio system
x
Power the BoomBoom 50
x
Pair the BoomBoom 50 with a Bluetooth-enabled headset or
speaker
x
Enjoy!
We will now explain this step by step.
5.1

Connecting to your TV or sound system

1a TV
Plug one end of the mini jack plug cable into your TV's
headphones jack. Your TV speakers are likely to be switched
off now and you can adjust the volume using your TV's remote
control (also refer to your TV's operating instructions).
1b Hi-Fi
Use the supplied adapter cord to connect the BoomBoom 50
to an analogue output (AUX OUT, TAPE OUT) on your audio
system.
2 Connect the other end of the mini jack plug cable to the
BoomBoom 50's Audio In.
5.2

Pairing

1. Make sure your Bluetooth headphones are close to the
BoomBoom 50. The best distance is about 1 metre.
BoomBoom 50
Description
Searching for last device
Pairing mode
Connected
Standby
7