Authorization (Optional) - Keba KeContact P20 Manual Del Usuario

Status LED
Flashes orange slowly every 5
seconds
Flashes red
Segment 1 lights up orange
Segment 2 lights up orange
2.2

Authorization (optional)

An (optional) authorization of a user for charging at the charging station can either occur with
a key switch or by means of RFID user cards depending on the device version.
Authorization required:
The status LED flashes blue slowly every 3 seconds.
Authorization successful:
A successful authorization will be indicated by a series of increasing tones.
Authorization failed:
A failed authorization will be indicated by a series of decreasing tones.
Note
After successful authorization, if the charging procedure is not started within 60 seconds, the au-
tomatic enable expires.
16/128
Authorization process
Function
Temperature limit exceeded (charging procedure temporarily interrupted;
charging continues after cooling down)
Malfunction (For details, see chapter "Troubleshooting")
RFID programming mode (RFID cards can be programmed in this mode.
For details, see chapter "Programming RFID user cards (optional)")
Commissioning mode
(the charging station is in commissioning mode)