Authorization Process; Status Led - Keba KeContact P20 Manual Del Usuario

2

Authorization process

2.1

Status LED

Status LED
Flashes slowly green
every 3 sec-
onds
blue
Lights up con- green
tinuously
blue
Flashes every green
second
blue
Lights up orange briefly after
plugging in
Green LED goes out briefly ev-
ery 3 seconds
Authorization process
Status LED - Segments...
The status LED provides information about the current
operating state of the charging station and consists of 4
segments (S1 to S4) which can light up together or in-
dividually.
All segments can light up or flash in different colors.
If not otherwise specified, all 4 segments light up to-
gether.
Function
Ready for operation (The charging cable is not yet plugged into the vehi-
cle.
Optional: The charging station was authorized correctly by key switch or
RFID card)
Authorization is required (charging station was not authorized correctly;
authorization with RFID, key switch or external enable required)
Ready for charging (charging cable is plugged in on both sides and
locked)
Ready for charging with ISO15118 (charging cable is plugged in on both
sides and locked)
External enable still required (authorization with RFID or key switch car-
ried out; vehicle connected correctly; external enable on the enable input
still required)
Charging procedure is being performed (applies for "EN 61851 Mode 3"
charging procedure)
Charging procedure is being performed (applies for "ISO 15118" charg-
ing procedure)
Wait for locking (charging cable was plugged in and the system attempts
to lock the plug)
Wait for unplugging (charging procedure complete, vehicle unplugged)
15/128