Stanley TLM30 Manual Del Usuario página 4

Operation
GB
1.
Point the laser at the top of the tool (Figure A #1)
toward the wall whose distance you need to measure
(Figure #1).
C
2.
Click (Figure
ON
display a laser dot on the wall (Figure
3. When the bottom of the tool is positioned at the
correct distance from the wall, click
measurement (Figure
4.
View the measurement on the display window (Figure
#2).
D
Changing the Unit of Measure
Once the current measurement is taken, you can change
the unit of measure from decimal ft (6.21 ft) to fractional
ft (6'02"9/16), fractional ft to meters (1.894 m), meters to
inches (74 9/16 in), or inches to decimal ft.
To change the unit of measurement, press and hold
until you see the measurement change (2-3 seconds).
NOTE: If you continue to hold
changes, the tool will turn off.
Re-measuring
If you need to take a new measurement, click
• The previous measurement (Figure
cleared from the display window.
• When you are ready to take the new measurement,
click .
ON
Turning Off the Tool
The tool can be turned off in either of these ways:
• After taking a measurement, press and hold
5 seconds (until the display window clears).
• If you do not use the tool for 45 seconds, it will
automatically turn off.
4
#3) to turn the tool on and
A
#1).
C
to take the
ON
#2).
C
after the measurement
ON
ON
#2) will be
D
ON
Warranty
STANLEY warrants this product for a period of Two (2)
years against deficiencies in material and workmanship.
This LIMITED WARRANTY does not cover products that
are improperly used, abused, altered, or repaired. Please
call 866-786-5924 for more information or return instructions.
Unless otherwise noted, STANLEY will repair without cost, any
STANLEY product found to be defective, including parts and
labor charges, or at STANLEY's option, will replace such tools
or refund the purchase price, less the amount for depreciation,
in exchange for the defective tool. THIS LIMITED WARRANTY
EXCLUDES ALL INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so these
limitations may not apply to you. This TWO YEAR LIMITED
WARRANTY gives you specific legal rights that may vary from
state to state. In addition to the warranty, STANLEY Lasers
are covered by: 30-Day Money Back Guarantee. If you are not
completely satisfied with the performance of your STANLEY
Laser for any reason, you can return it within 30 days from the
date of purchase with a receipt for a full refund.
ON
IMPORTANT NOTE: The customer is responsible for the
correct use and care of the instrument. Moreover, the
customer is completely responsible for periodically checking
the accuracy of the laser unit, and therefore for the calibration
.
of the instrument.
Calibration and care are not covered by warranty.
for