Tabla de contenido
Idiomas disponibles
Idiomas disponibles
AX-459
Start-up
in mode 1 (standard)
2
4
AUX
1
3
MIN.
MIN.
MIN.
MAX.
MAX.
MAX.
F
F
F
NOTE:
It is a good idea to memorise these values(F+1) so that
when the amplifier is switched off and back on again it
will reset with these values.
USER MENU
Use in mode 1 (standard)
ON
ON
START-UP
MOD
OFF
RECOVER MEMORIZED
SETTINGS
INDICATE VOLUME VALUE
5
7
MIC
6
8
MIN.
MIN.
MAX.
MAX.
SELECT
4 o 3
MICROPHONE INPUT (E1) ON
SELECT
AUXILIARY INPUT (E2) ON
1 o 2
MEMORIZE
1
VALUES
RECOVER VALUES
2
MEMORIZED
BY THE USER
INPUT
4
ACTIVE
E1 or E2
Volume
Value
TREBLE
Treble
Value
BASS
Bass
Value
PUSH SHORT TIME.
Operation
with remote-controlled
message priority
REMOTE-CONTROLLED
TM1 (E1)
MESSAGE PRIORITY
REMOTE-CONTROLLED
TM2 (E2)
MESSAGE PRIORITY
Operating the AX-459 with remote controls TM1 and TM2.
Regardless of which active input is selected (E1 or E2), when TM1 is
pulled E1 becomes the active input, with its corresponding volume,
treble and bass settings. At the same time, the attenuator control
device is activated with 3-wire message priority (terminal P).
Once remote control TM1 is off, the device will revert to its previus
status.
Similarly, if TM2 is pulled input E2 will become the active input with
its corresponding settings, and the priority device is also activated.
During the issue of a priority message all pushbuttons are
deactivated.
If TM1 and TM2 are pulled simultaneously, TM2 will be given priority.
INDICATE
VOLUME VALUE
ISSUE
PRIORITY
MESSAGE
INDICATE
VOLUME VALUE
ISSUE
PRIORITY
MESSAGE
610.105A
14
15
Tabla de contenido
