Samsung UF-80 RS-232C Manual Del Usario página 5

PC Transmit Data to MICOM
Command
1st
Focus FAR
0 x 25
Focus NEAR
Zoom Tele
0 x 26
Zoom Wide
Iris Target 0 x 41
Red Target 0 x 43
Blue Target 0 x 44
Focus Target 0 x 45
Zoom Target 0 x 46
Focus/Zoom
0 x 47
concurrent Target
(1)
Drive Stop 0 x 2F
[Note 1] Depending of the zoom amount, the range of focus data will be changed. You can figure it out to see
page 4. ("Focus-Status[Max]", "Focus-Status[Min]")
[Note 2] Above 10 Command (Iris up/down ,Red up/down, Blue up/down, Focus far/near, Zoom tele/wide) will
go to all the way once you execute it.
"Drive Stop" can stop those command in certain point that you want.
RS232C Command Code (UF-80)
2nd 3rd 4th
0 x 00 0 x 05 0 x 00
0 x 00 0 x 0A 0 x 00
0 x 00 0 x 05 0 x 00
0 x 00 0 x 0A 0 x 00
0 x 00 0 x 00 "data"
0 x 00 0 x 00 "data"
0 x 00 0 x 00 "data"
0 x 00 "MSB data" "LSB data"
0 x 00 "MSB data" "LSB data"
0 x 05 "zoom MSB" "zoom LSB"
0 x 0A "focus MSB" "focus LSB"
0 x 00 0 x 05 0 x 00
PC Receive Data from MICOM
1st 2nd 3rd
"ACK data" 0 x 05
0 x 25
"ACK data" 0 x 0A
"ACK data" 0 x 05
0 x 26
"ACK data" 0 x 0A
0 x 41 "ACK data" 0 x 00
0 x 43 "ACK data" 0 x 00
0 x 44 "ACK data" 0 x 00
0 x 45 "ACK data" "MSB data" "LSB data"
0 x 46 "ACK data" "MSB data" "LSB data" Range: "0~1904"
"ACK data" "zoom MSB" "zoom LSB"
0 x 47
"ACK data" "focus MSB" "focus LSB"
0 x 2D "ACK data" 0 x 05
Remark
4th
0 x 00
0 x 00
0 x 00
0 x 00
"data" Range: "1~120"
"data" Range: "1~200"
"data" Range: "1~200"
(1)
Range: "0~2225"
(1)
Focus: "0~2225"
Zoom: "0~1904"
0 x 00
5