Belkin TuneBase FM Manual Del Usuario página 11

Troubleshooting
Issue – The TuneBase FM does not appear to be saving my settings.
Solution - Be sure not to remove the iPod from the cradle or remove power
to the TuneBase FM while adjusting the TuneBase FM settings. Your settings
are stored in memory when the iPod screen returns to the iPod Main Menu.
Issue – The TuneBase FM and iPod are in the way of my car's
controls.
Solution - The TuneBase FM has been designed to easily position in a
wide range of orientations within the car. Use the flexible gooseneck and
the articulation behind the docking cradle to position it away from any
controls of the car. Be sure to position the gooseneck in as close to an
upright position in relation to the adapter as possible (Fig. B).
Issue - The TuneBase FM rotates out of position around the center
of the power outlet.
Solution 1 - Be sure to solidly attach the cigarette-lighter adapter portion
Fig. B
of the TuneBase FM in the power outlet. Test the stability by pushing it
sideways before driving.
Solution 2 - In some cars, the power outlet is bigger in diameter than the cigarette-lighter
adapter. You will notice a wiggle in the TuneBase FM when pushing it. In that case, fit the
collar provided around the TuneBase FM's cigarette-lighter adapter. Then, attach the
cigarette-lighter adapter to the power outlet. Slide the collar into the power outlet, making
sure that all four protrusions securely fit into the power outlet.
Solution 3 - Some power outlets will not fit all four protrusions of the collar. In order to
improve the fit of the cigarette-lighter adapter in the power outlet of the car, you can cut
the collar to size. In order to do so, please cut as many protrusions as necessary with scissors.
Carefully cut one by one, always trying the fit in the power outlet after each cut. Cut the
protrusions from one side to the other (Fig. C).
Fig. C.
cut cut cut
Test fit in
power outlet after
each cut!
Troubleshooting | 09