Setting The Electronic Speed Controller - Carson DRAGSTER SPORT BRUSHLESS SENSORLESS Instrucciones

7. Setting the electronic speed controller

The speed controller can be operated immediately after it has been
synchronized with the transmitter. However, specific parameters can
be adjusted to suit particular conditions.
The controller is programmed using the SET button. When you press
the button down, different LEDs and combinations of LEDs flash one
after the other. Each LED combination represents a particular menu
which can be selected and set by releasing the SET button at the
GB
required combination.
The following parameters may be selected:
• Battery type (NiCd/NiMH, LiPo), Cut-Off
• Training journey / racing mode
• Braking action 0% - 70%
• Percentage drag brake when the throttle / braking lever is in
neutral 0% - 45%
• Dead band Level 1 – 5
• Driver profi le 1 - 5: Select from four pre-programmed settings for
throttle / brake.
Profile 5 resets the speed controller to the factory defaults.
You have various tuning options within the individual menu items.
These are distinguished by the flashing frequency of individual or
several LEDs, and are selected by pressing the SET button.
When you select the menu item, the LED flashes / LEDs flash in the
frequency of the previously selected option.
12
011847_anl_906056_regler_drag_7k12 12 011847_anl_906056_regler_drag_7k12 12
CARSON DRAGSTER Brushless-Regler 906008+906056
04.03.2008 11:45:12 Uhr 04.03.2008 11:45:12 Uhr