Trevi XF 800 Guia Del Usuario página 8

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
SETTING TONE TREBLE AND BASS
Turn the knob TREEBLE (13) to adjust the treble.
Turn the knob BASS (14) to adjust the bass.
ECHO EFFECT
Turn the knob ECHO (15) to increase or decrease the echo effect on the inputs MIC.
Note: the echo only works on microphone inputs.
DISCO-LIGHT EFFECTS
To activate the effects Disco Light-long press the LED ON/OFF(2). The display show "ON".
To cancel the effect Disco-Light, press the LED ON/OFF(2) until the display shows "OFF".
VOICE GUIDE
To activate the voice guide (only in English), press and hold for a few seconds the PLAY button (5).
To turn off the voice guide, press and hold for a few seconds the PLAY button (5) .
FUNCTION RADIO FM
AUTO MEMORY
1. Turn on the unit and press repeatedly the MODE key(8) on unit, or the MODE(25) on remote control and select RADIO function (the display will
show the frequency).
2. Press the PLAY button(5) on the unit or the key
radio stations and saves them automatically). The station's number stored depends on the radio signal in your area. During the search, press
PLAY button (5) on the remote control to stop recording.
3. Use the NEXT(4) and PREV(6), or the keys :(30) and 9(28) on the remote control to listen to the various radio stations saved in memory.
4. To call the number of a preset station using the number keys(21) on the remote control.
For example, to call up the station number 12, first press 1 and then 2.
DIRECT RECALL OF FREQUENCY
1. Use the keypad (9) to tune the desired frequency.
For example, to listen to 93.1MHz frequency type 9 3 1.
Note:
- The FM reception depends on the place where you place the unit.
- The proximity of TV sets, fluorescent lamps or other appliances may cause interference in the reception of radio programs, in this case, move this unit.
BLUETOOTH OPERATION
1. Turn on the machine and press the MODE(8) on unit, or the MODE(25) on remote control to select the Bluetooth function, the display shows
"BLUE".
2. In the Bluetooth mode, the symbol
3. Activate the Bluetooth feature on the external device to be coupled.
4. Initiate a search for devices. After select the "TREVI XF800".
5. Enter the password "0000" if required.
6. Press the PLAY button(5)on the unit or the key
:(30) and 9(28) for the selection of songs.
PLAY ON INPUT USB/SD
1. Turn on the unit.
2. Insert a USB memory or an SD card into the USB/SD(10) slot. Playback starts automatically.
3. To pause playback, press the PLAY button(5) on the unit or the key
4. To resume playback, press the PLAY button(5) on the unit or the key
5. Press the NEXT(4) or key :(30) on the remote control while listening to switch to the next track. Press the PREV (6) or 9(28) on the remote to
go to the previous tracks.
6. Using the numeric keypad(21) on the remote control you can directly enter the number of the song you want to play.
7. Press once REPEAT button(20) on the remote, the display (9) will show "ONE", to continually play the same track; press it a second time, the
display (9) will show "ALL" to continuously play all songs in the USB / SD.
Note:
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
- From the computer to format the USB memory/SD FAT (16 or 32).
AUX-IN
1. Turn on the unit.
2. Connect any unit equipped with audio output, through a cable 3.5mm jack (not included) to the AUX IN(12).
3. Press the MODE button(8) on the unit, or the MODE(25) on the remote control, and select the "AUX", the display will show "U".
4. Use the external device from their commands.
USING THE MICROPHONE
1. Connect the supplied microphone into the jack MIC(11).

(22) on remote control to activate the auto memory (the radio starts an automatic search
on display will start flashing, the system automatically enters search mode.
(22) on remote control, to start playing and the buttons NEXT(4) and PREV(6), or the keys


(22) of the remote control, the display will show the icon Paus.

(22) of the remote control.
8
XF 800
Tabla de contenido
loading

Tabla de contenido