Haier ESD200 Manual Del Usuario página 14

ESD200-MANUAL 1/10/03
7) At the end of the wash program, the machine will beep a few times to indicate
that the wash process has finished. Simply shut off the unit by pressing the
"POWER" button.
Note: DO NOT open the dishwasher door immediately because the moist hot
air remaining inside the tub may cause harm.
Warning: Keep children away from the machine when the door is
left to dry the dishware because the moist hot air is
exiting out of the door may cause harm.
Canceling or Resetting Wash Cycle
Note: The dishwasher will automatically release detergent within a few minutes
after the start of the wash program. To avoid the "release of detergent"
before you cancel or reset the wash program, you must press the
"START/PAUSE" button right away.
• Once you have reset to a new wash cycle, you must refill the detergent
compartment if it is open and empty because the detergent from previous wash
cycle may have already been released.
Follow the steps below to cancel or reset a wash program:
1) Press "START/PAUSE" button to pause the wash program.
2) Turn "OFF" the dishwasher power by pressing the "POWER" button to cancel the
program.
3) Turn the dishwasher back "ON" again by pressing the "POWER" button.
4) Reset by reselecting the porper wash program.
5) Reselect the proper wash option(s) with the selected wash program.
6) Press the "START/PAUSE" button to begin the wash process.
11:29 AM Page 14
English
12