Idiomas disponibles
Idiomas disponibles
USA
GB
A
My computer
Step-by-step installation
1 Go to part "B" of this Quick Install Guide only if your computer does not yet have a drive for starting CD 1.
2 Place CD 1 in your computer's drive. It should start automatically.
If not, double-click "My Computer", double-click the "Philips_RW" drive icon and double-click "Setup.exe" to start CD 1.
3 After the installation program on CD 1 has started, follow its on-screen directions for installing your new Philips drive.
Apple MacOS users: Please consult the readme file in the root folder.
B
Only use these drive connection instructions if your computer does not yet have a drive for starting CD 1.
1 Download the driver software from the Internet at www.pcstuff.philips.com/downloads/products/IW_Ext_Update.exe.
There you will find a driver file and a help file. Please consult this help file for further instructions.
2 Take the cable for the interface you have chosen to use and plug it into the appropriate connector on the drive.
3 Plug the other end of the cable into the appropriate connector on your PC. Always consult your computer manual for assistance.
4 Plug the small power plug into the drive.
5 Plug the mains adapter into the mains socket and, if applicable, use the on/off button to switch on the drive. Then complete the 'Add/Found New Hardware Wizard' dialog and
refer to the location to which you downloaded the driver file when asked for the location of any driver files.
6 Go to part "A" of this Quick Install Guide and start CD 1 in your new external drive to be able to verify your installation and to install application software.
Philips_RW
setup.exe
