ION Solar Stone Glow Guia De Inicio Rapido página 4

Outdoor Use and Care
Though Solar Stone Glow is water-resistant and able to tolerate splashing water, please
review the tips below to get the best performance from Solar Stone Glow:
•
Bring Solar Stone Glow indoors during extreme cold, heavy rain, or melting snow.
•
Please do not place Solar Stone Glow in standing water.
•
Please do not connect the charging adapter to Solar Stone Glow in a wet environment.
Make sure the charging adapter input, charging adapter, and power outlet are all
completely dry before making any connections.
•
WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry
place where they will not be affected by water and cause a risk of electric shock.
Features
1. Power: Hold this button to power
Solar Stone Glow on and off.
2. Bluetooth Connect: Press this button
briefly to begin Bluetooth connecting.
Note: Solar
automatically power off after 30
minutes if no audio is playing and the
rear LEDs are not on.
3. Link: Press this button to link two Solar Stone Glow units together.
4. Light Control: Press this button to adjust the brightness settings for the lights: LED low,
LED high, and off.
5. Charging Adapter Input: Insert the included charging adapter here to charge the Solar
Stone Glow battery.
Solar Stone Glow should be fully charged prior to first use for maximum battery life. Once
fully charged, Solar Stone Glow's solar panel can provide suitable power for typical daily
use without the need to connect the charging adapter. Results will vary depending on daily
number of hours Solar Stone Glow is exposed to direct sunlight.
6. Reset: If Solar Stone Glow is working abnormally,
paperclip into the Reset hole located on the back of
until the unit turns off. Try this only after you have first attempted to reboot
Glow using the power button.
7. Charging LED: This LED is solid red when the battery is charging and turns off when the
battery is fully charged/no adapter is connected.
8. Bluetooth LED: This LED slowly blinks blue when the speaker is powered on, blinks fast
while Bluetooth searching, and is solid when Bluetooth connected.
9. Link LED: This LED blinks fast when searching for another Solar Stone
when linked to another Solar Stone Glow.
4
Stone Glow will
9
7 8
1
2 3
shutdown the unit by placing a
Solar Stone
6
5
4
Glow, and gently push
Solar Stone
Glow and is solid