bluefin BF DC-25T Manual De Instrucciones página 2

USAGE
INTENDED USAGE
The cooler is suitable for cooling and freezing foods. The device is also suitable for use on
boats.
The device is designed to be operated from a 12V or 24V on-board supply socket of a vehicle,
boat or caravan.
- This appliance is for usage in household and work environments.
- The appliance is suitable for camping use, however it should not be exposed to rain.
- To avoid health hazards, ensure that the temperature of the appliance is sufficient for
storage.
- The appliance should be operated from a DC power supply of a vehicle, boat or caravan, a
DC auxiliary battery or an AC power supply.
- For DC input condition, the voltage range required is DC20.5-31V, if the power is not stable,
the unit will not run. The unit will restart when the voltage is normal.
- For AC input condition, the voltage range required is 187-242V.
CONTROLS
3
o
C
OPERATION
BEFORE INITIAL USE
Before starting your new cooler for the first time, you should clean it inside and outside
with a damp cloth for hygienic reasons (please refer to cleaning instructions within this
manual.
Operation with AC220-240V / 50Hz-60HZ:
- Connect the appliance to a AC220-240V power source using the removable AC cable
supplied with the appliance
- In the temperature window the temperature last set will flash for five seconds and then
automatically change to display the temperature inside the appliance
- Press the "up" or "down" keys to set the temperature you require
- The set temperature will flash for five seconds and then automatically change to display
the temperature inside the appliance
Operation with DC12V/DC24V:
- Connect the DC cable supplied with the appliance to a suitable DC socket outlet. A 120
watt DC socket outlet is recommended. The appliance will automatically identify and
apply DC12V or DC24V.
- The LED light "12V" (note: 12V and 220-240V share the same light) or "24V" will illuminate
the indicate the appliance is working
- In the temperature window the digital temperature last set will flash for five seconds and
then automatically change to display the temperature inside the appliance
- Press the "up" or "down" keys to set the temperature you require
- The set temperature will flash for five seconds and then automatically change to display
the temperature inside the appliance
Note:
When using 24V and 220-240V together, make sure to plug in 220-240V power cord
first then the 24V power cord. Otherwise the appliance will beep, indicating low voltage.
This is not a malfunction/fault.
SAVING ENERGY
- Store the appliance in a well-ventilated setting, avoiding direct sunlight
- Do not leave the door to the appliance open for longer than necessary
- Allow food to cool down before storing in the appliance.