j5 create JUA350 Manual Del Usuario página 20

USB DISPLAY ADAPTER
A. Connect all external display devices (monitor/ projector) to the HDMI/DVI
connector of USB 3.0 Display Adapters and switch power on.
B. Connect the USB 3.0 Display Adapter into available USB port of PC or
Notebook.
After Inserting an USB 3.0 Display Adapter into a USB port, the systems will
automatically start the installation procedure and the prompt message will pop-
up on the task bar.
The Device driver software was installed properly, if you are going to install more USB
3.0 Display Adapters, repeat step A & B or restart computer
The functions of the USB 3.0 Display Adapter will be activated after the computer
restarted. You might see the mirror display shown on the display device.
You can modify the corresponding position of each extend display via display settings.
Go to "START" → "Control Panel" → "Appearance and Personalization" → "Display
Properties" →"Settings"
20
When Display Properties windows
appears, each monitor's number can
be identified by clicking "
" identify"
Drag the monitor to the location you
want.
USER MANUAL