j5 create JUA350 Manual Del Usuario página 10

USB DISPLAY ADAPTER
6. After rebooting connect the external display device (monitor/ projector) to the
HDMI connector or the DVI connector of USB Display Adapter and turn on the
display device.
7. Connect the USB 3.0 Display Adapter into an available USB port of a PC or
Notebook, After Inserting the USB 3.0 Display Adapter into an USB port, the
"Installing device driver software" message will pop up.
If the Driver software was installed successfully the following message should
appear:
If you're not going to install another USB 3.0 Display Adapter, restart your PC. The
functions of the USB 3.0 Display Adapter will be activated after the computer restarted.
Multi USB 3.0 Display Adapter Installation
For installation of multiple USB 3.0 Display Adapters, during the "Install Shield Wizard
complete" step, select "No, I will restart my computer later." and click Finish to
continue next step below
10
USER MANUAL