Idiomas disponibles
Idiomas disponibles
The fuel tank is empty
The primer bulb was not pressed enough
The fuel is old (over 30 days)
The spark plug is fouled
The fuel is old (over 30 days)
Idle speed screw needs adjustment
Too much oil in crankcase
The fuel is old (over 30 days)
The cutting head is bound with grass
The fuel is old (over 30 days)
The spark plug is fouled
Cutting blade is dull/damaged
Cutting material exceeds capacity
Bolts/Nuts are loose
Gas/oil is incorrect
WWW.SENIXTOOLS.COM
Fill the fuel tank with fresh fuel
Press the primer bulb 10 times
Drain the fuel tank and add fresh fuel
Replace the spark plug
Drain the fuel tank and add fresh fuel
Turn idle speed screw clockwise to increase idle speed
lubricant
Drain the fuel tank and add fresh fuel
Stop the engine and clean the cutting head
Drain the fuel tank and add fresh fuel
Replace the spark plug
Only cut material according to the capacity of the unit
Tighten
15
