VWR VisiCam Serie Manual De Funcionamiento página 4

Installation of Drivers
•VisiCam 3.0 plus: 630-2737 ; VisiCam 5.0 plus: 630-2738
Connect the camera to your computer USB 3.0 port. No drivers installation is required. This camera is
driver-free.
•VisiCam 16.0 plus: 630-2919
1. Insert the installation CD-ROM into your CD-ROM driver.
2. Connect the camera to your computer USB 2.0 port
3. Browse the CD and go to the /DRIVERS folder and select the file
corresponding to your camera name, for example "VISICAM 1.3
Driver Setup.exe"if you purchased the VISICAM 1.3 camera
4. Follow the instructions on the screen until the drivers installation ends
succesfully.
5. When the installation is over, click on "Finish". Eurekam drivers are
now installed on your personal computer.
6. To check if drivers have been succesfully installed, you can go to the
Panel control/Device Manager of your computer: when the drivers
are installed correctly, there is no yellow mark over the camera
name under the Imaging devices in the Device manager.
7. Restart the system if requested.
Installation of "IS VisiCam Image Analyser" Software
VisiCam Image Analyser Software allows you working with VisiCam 3.0 plus and VisiCam 5.0 plus
cameras. You can:
•Preview and Acquire images from camera.
•Acquire videos
•Control main parameters of camera (colours balance, contrast, white balance...)
•Edit images you acquired (rotate, crop, measure, count....)
Insert the installation CD-ROM into CD-ROM driver of your computer.
1.
2. Browse the CD and go to the /SOFTWARE folder and select the IS VisiCam Image Analyser file
3. Installation wizard will start
4. Select path where you want to install the software, if necessary
5. When installation is finished, click Finish button to end the wizard.
6. Software is now correctly installed into your computer and you can start it from your Program list or
Desktop
4 – VisiCam PLUS digital cameras