Chapter 3: Connecting The 10/100 Switch; Overview - Cisco Systems Linksys SD205 Guia Del Usuario

The power port is located on the side panel of the Switch (see Figure 2-3).
(power) The power port is where you will connect the included power
adapter.
The security slot is located on the other side panel (see Figure 2-4).
(security slot) The security slot is where you can attach a lock so the Switch
will be protected from theft.
6
Figure 2-3
Figure 2-4
Chapter 3: Connecting the
10/100 Switch
Planning Your Network Layout

Overview

This chapter will explain how to connect network devices to the Switch. For an
example of a typical network configuration, see the application diagram shown
in Figure 3-1.
Broadband
Cable/DSL
Internet Router
Modem
Figure 3-1
When you connect your network devices, make sure you don't exceed the
maximum cabling distances, which are listed in the following table:
Maximum Cabling Distances
From
Switch Switch or Hub*
Switch or Hub
*A hub refers to any type of 100Mbps hub, including regular hubs and stackable hubs. A 10Mbps hub
connected to another 10Mbps hub can span up to 100 meters (328 feet).
Desktop PC Notebook Access Point
To Maximum Distance
100 meters (328 feet)
Computer 100 meters (328 feet)
1
1
7