Installation; Clearance To Combustibles - Pleasant Hearth L-20WGH Instrucciones De Instalación Y Funcionamiento Para El Propietario

INSTALLATION

The stove should be located in an area:
1. Out of direct sunlight
2. Not susceptible to moisture
3. Away from uninsulated outside wall
WARNING
The heater is heavy and should be
assembled near its desired location.
It is recommended that two people move
the assembled stove to prevent injury.
WARNING
Do not install the unit on shelves, raised platforms, beds, blankets, pillows etc. Keep combustible
materials such as furniture, bedding, papers, clothes and curtains at least 3 ft. (914 mm) from the stove.
ASSEMBLY INSTRUCTIONS
1. Unfold Grate (B) Legs and place level on a padded surface.
2. Place the Heater Box on Grate evenly. Insert 2 screws (C) into predrilled holes and tighten securely for each leg.
3. Plug the power cord into the 15-amp, 120-volt outlet. Use an extension cord rated for a minimum of 1,875 watts if
necessary.
4. Place log on top of heater and connect plug.
CAUTION: Make sure that the unit is installed so that the power cord is not compressed against or caught on the stove and
that it has an unobstructed path to the grounded outlet.

Clearance to Combustibles

Sides 4 in. (101.6 mm)
Floor 0 in. (0 mm)
Top 36 in. (914 mm)
Front 36 in. (914 mm)
Rear 0 in. (0 mm)
7