Tabla de contenido
Enlaces rápidos
© 2009-2010, Moog Videolarm, Inc. All Rights Reserved
R H W 7 5
Vandal- Resistant Rugged (Outdoor Dome Housing)
Installation and Operation Instructions for the following models:
RHW75C2N
IP Network Ready 7" Vandal-Resistant Outdoor dome housing with wall mount, rugged cast
aluminum top and polycarbonate clear dome, with 24VAC input, heater/blower, for an IP
Network PTZ camera, 120 to 24VAC transformer.
RHP75C2N
IP Network Ready 7" Vandal-Resistant Outdoor dome housing with pendent mount, rugged cast
aluminum top and polycarbonate clear dome, with 24VAC input, heater/blower, for an IP Network
PTZ camera, 120 to 24VAC transformer.
IRHW75C2N IP Network Ready 7" Vandal-Resistant Indoor dome housing with wall mount, rugged cast aluminum
top and polycarbonate clear dome, with 24VAC input, heater/blower, for an IP Network PTZ camera,
120 to 24VAC transformer.
IRHP75C2N
IP Network Ready 7" Vandal-Resistant Indoor dome housing with pendent mount, rugged cast
aluminum top and polycarbonate clear dome, with 24VAC input, heater/blower, for an IP
Network PTZ camera, 120 to 24VAC transformer.
RHW75C2NE IP Network Ready 7" Vandal-Resistant Outdoor dome housing with wall mount, rugged cast
aluminum top and polycarbonate clear dome, with 24VAC input, heater/blower, for an
IP Network PTZ camera, 120 to 24VAC transformer. (European Model)
Before attempting to connect or operate this product, please read these instructions completely.
www.videolarm.com
CERTIFIED
81-IN5309
07-26-2010
Tabla de contenido
Manuales relacionados para Moog Videolarm RHW75
Resumen de contenidos para Moog Videolarm RHW75
- Página 1 © 2009-2010, Moog Videolarm, Inc. All Rights Reserved R H W 7 5 Vandal- Resistant Rugged (Outdoor Dome Housing) www.videolarm.com Installation and Operation Instructions for the following models: RHW75C2N IP Network Ready 7” Vandal-Resistant Outdoor dome housing with wall mount, rugged cast aluminum top and polycarbonate clear dome, with 24VAC input, heater/blower, for an IP Network PTZ camera, 120 to 24VAC transformer.
-
Página 2: Important Safeguards
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth. ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK). -
Página 3: Disclaimerof Warranty
LIMITED WARRANTY FOR VIDEOLARM INC. PRODUCTS VIDEOLARM INC. warrants this Product to be free from defects in material or workmanship,as follows: PRODUCTCATEGORY PARTS LABOR All Enclosuresand Electronics Five (5) Years Five (5) Years Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan /tour operation /tour operation... -
Página 4: Electrical Specifications
Contents of Box Electrical Specifications RHW75 Power 24VAC Class 2 Only 24 VAC 92 Watts Accessories: Heater: 50 Watts, Blower: 2 Watt Camera Power: (See Camera Specifications): 40 Watts Max Tools Required: .100” Flat Head Screwdriver Phillips Head Screwdriver English... -
Página 5: Wall Mounting
WALL MOUNTING 4”-5” Trim incoming control & power wires to 4”- 5”, Bracket is designed for 45° conduit tting (If using the for either wall or pendent bracket conduit). Run wire into bracket secure to wall. • El soporte se diseña para la guarnición del conducto 45° (si usa el •... - Página 6 WALL MOUNTING Important Gasket Must be in place 40 Watts 26 Watts COAX (coax wire not supplied) Wiring the dome can be completed by Align large arrows referring to the diagram. • Atar con alambre la bóveda puede ser terminada • Con seguridad soporte del montaje a emparedar. Tire del cableado refiriendo al diagrama.
- Página 7 FOR PENDENT/ WALL MOUNTING 4”-5” Trim incoming control and power wires to 4-5 for Secure lanyard to lanyard clip either wall or pendent bracket • La tapa segura de la cubierta SM5 con mercancías duras • Con seguridad soporte del montaje a emparedar. Tire del cableado proporcionó;...
- Página 8 Important Gasket Must be in place Align large arrows To lock turn clockwise • Alinee las flechas grandes • Alinee las flechas grandes • Alignez les grandes flèches • Alignez les grandes flèches • Richten Sie große Pfeile aus • Richten Sie große Pfeile aus •...
- Página 9 RJ45 24VAC POWER Camera Max 40 Watts Camera Orange Heater/Blower Yellow 26 Watts Heater/Blower Green Alarm 1 Blue Alarm 2 Violet Alarm 3 Gray Common White Make the appropriate male and female connections. Indoor model does not include pre-run cables. •...
- Página 10 Captive Axis 213 (3) #8x3/8” Screw Mounting Plate ½" 1" 2" MOUNTING HOLE MOUNTING HOLE Install the camera to the mounting plate with (2) #10 screws and lock washers provided. Place (3) #8x3/8” screws on the spacers and align the mounting slots. Slide on plate and camera then secure. •...
- Página 11 Axis 215 (3) #8x3/8” Mounting Plate 1" 1" 2" MOUNTING HOLE MOUNTING HOLE Install the camera to the mounting plate using (4) #8 bolts and lock washers. Place (3) #8x3/8” screws on the spacers and line up the mounting slots. Slide plate in and secure. •...
- Página 12 AXIS 231-232D AXIS 231-232D Locking screw Loosen Screw Loosen the screw to the right of the tab by Align mounting plate and turn counter- approximately (5) turns. clockwise, secure locking screw. • Alinee la placa de montaje y dé vuelta a la •...
- Página 13 Open Screw Slots Cable Ties POWER Camera Power (24VAC) Orange Camera Power (24VAC) CONTROL RJ45 Ethernet Connector ALARMS Alarm 1 Blue Alarm 2 Violet Alarm 3 Gray Common White Captive Screw Complete the wiring to camera. Attach the camera assembly to the housing by sliding the (3) This is what the typical path of illumination will look like with the setting at 30 degrees.
- Página 14 Axis 233D Slots Fastener Position camera and mounting plate on top of spacers. Secure quick release turn plate by tightening (3) bolts and (1) fastener. • Asegure la placa rápida de la vuelta del lanzamiento apretando (3) los pernos y (1) la cámara fotográfica del sujetador en la posición usando ranuras.
- Página 15 Axis 233D Important information for the model of camera. English Due to the high 35x zoom feature of the Axis 233D camera, a slight focus issue may occur when the camera lens is fully extended within the Videolarm camera housing. For applications where the full 35x high-powered zoom is needed, please contact Videolarm to request a complimentary enhanced optically clear acrylic dome.
- Página 16 CANON - VB-C10 Captive Screw Mounting Plate (3) #8x3/8” 1" 2" MOUNTING HOLE MOUNTING HOLE Install the camera to the mounting plate with (2) #10 screws and lock washers provided. Place (3) #8x3/8” screws on the spacers and align the mounting slots. Slide on plate and camera then secure. •...
- Página 17 ELMO 400/401 Captive (4) #8x3/8” Screw Mounting Plate 1" 1" 2" MOUNTING HOLE MOUNTING HOLE Attach camera to mounting plate using (4) #8 screws, star washer, and nuts. Complete assembly as shown, then secure camera to the quick release plate. •...
- Página 18 JVC-VN625U Captive (4) #8x3/8” Screw Mounting Plate ½" 1" MOUNTING HOLE Attach quick release bracket to mounting plate using (4) #8 screws and star washer. Complete assembly as shown, then secure camera to the quick release adapter. • Una el soporte rápido del lanzamiento a la placa de montaje usando (4) los tornillos #8 y la arandela de la estrella. Termine a asamblea como cámara fotográfica demostrada, después segura a la placa rápida del lanzamiento.
- Página 19 Panasonic KX-HCM180 Captive (3) #8x3/8” Screw Mounting Plate ½" 1" 2" MOUNTING HOLE Attach camera bracket to mounting plate using (1) ¼” x 20 bolt, lock washer, and washer. Complete assembly as shown, then secure camera to the quick release plate. •...
- Página 20 Panasonic WV-NS954 (4) #8x3/8” Mounting Plate 1" MOUNTING HOLE Attach bracket to (4) spacers using (4) #8 screws and star washer. Complete assembly as shown, then secure camera to the quick release plate. • Ate el soporte (4) a los espaciadores usando (4) los tornillos #8 y arandela de la estrella. Termine a la asamblea como se muestra, entonces cámara segura a la placa del lanzamiento rápido.
- Página 21 Sony RZ30 Captive (3) #8x3/8” Screw Mounting Plate ½" 2" MOUNTING HOLE Attach camera to mounting plate using (1) ¼” x 20 bolt, washer, and lock washer. Complete assembly as shown, then secure camera to the quick release plate. • Ate la cámara a la pletina usando (1) perno de x 20 del ¼”, arandela, y arandela de cerradura. Termine a la asamblea como se muestra, entonces cámara segura a la placa del lanzamiento rápido.
- Página 22 TOA 2564 Captive (4) #8x3/8” Screw Mounting Plate MOUNTING HOLE Attach camera to mounting plate using (4) #8 screws and star washer. Complete assembly as shown, then secure camera to the quick release plate. • Ate la cámara a la pletina usando (4) los tornillos #8 y arandela de la estrella. Termine a la asamblea como se muestra, entonces cámara segura a la placa del lanzamiento rápido.
- Página 23 Pixord 261/263 Captive (3) #8x3/8” Screw Mounting Plate ½" 1" MOUNTING HOLE Attach camera bracket to mounting plate using (3) #8 x ⅜” bolts, washer, and nuts. Complete assembly as shown, then secure camera to the quick release plate. • Ate el soporte de la cámara a la pletina usando (3) pernos, arandela, y las tuercas del ⅜ de #8 x los”. Termine a la asamblea como se muestra, entonces cámara segura a la placa del lanzamiento rápido.
-
Página 24: Replacement Parts List
Replacement Parts List RHW75 IRHW75 PART NUMBER DESCRIPTION RC7C CLEAR REPLACEMENT CAPSULE 1A RC7T TINTED REPLACEMENT CAPSULE RPRH752 LOWER TRIM RING RPRH7503 DOME CLAMPING RING RPNET02 NETWORK HGS POWER SUPPLY RPFD072 24V HEATER 5A RPFD072/12 12V HEATER (12VDC MODELS ONLY) -
Página 25: Product Registration/Warranty
Product Registration/Warranty Thank you for choosing Videolarm. We value your patronage and are solely committed to providing you with only the highest quality products available with unmatched customer service levels that are second- to-none in the security industry. Should a problem arise, rest assure that Videolarm stands behind its products by offering some of the most impressive warranty plans available: 3 Years on all Housings, Poles, Power Supplies, and Accessories and 5 Years on all camera systems (SView, QView, Warriors), and InfraRed Illuminators. Register Your Products Online Mail-In Option 1: Option 2: Take a few moments and validate your purchase with our Online Product Registration Form www.videolarm.com/productregistration.jsp or complete and mail-in the bottom portion of this flyer. Register your recent Videolarm purchases and benefit from the following: • Simple and Trouble-Free RMA process • Added into customer database to receive product updates / news • Eliminate the need to archive original purchase documents: Receipts, Purchase Orders, etc… Cut at the dotted Line Place in envelope, affix stamp and mail to: Videolarm ATTN: Warranty Main Contact Info 2525 Park Central Ave. Decatur, GA 30035 First Name: Last Name: Professional Title: Company: Address 1: Address 2: City: State / Province/Country:...