PALSON Diábolo Plus Modo De Empleo página 37

GB
Docking station for automatic recharging
Charger display and control panel
Main view
Docking station instructions for use and operating mode
No.
Operating guide
1 LED accent light
2 Accent light indicator
3 Power LED
4 Charging indicator
5 Signal transmission
Positive and negative
6-7
electrode recharge
DC power recharging
8
socket
1. LED accent light
2. Accent light indicator
3. On LED
4. Charging indicator
5. Signal transmitter
6. Positive charge point
7. Negative charge point
8. DC power socket
Press the switch to turn the accent light on or off
The power LED will turn on when the docking station is connected
to the mains, and will turn off when disconnected.
The indicator will flash for as long as the charger is connected to
the robot.
The signal transmission is the only way to guide the robot to the
docking station to recharge; therefore the path of the transmission
signal must be clear and free from obstructions.
The electrode and the robot are connected to charge upon contact,
therefore the path must be free from obstacles while in use, which
could have an impact on the recharge.
The recharging socket, or charger, is used to connect the 24V DC
outlet to the adapter and acts as the transit station for charging
between robot and adapter. The charger should be securely
attached to the wall and the adapter cable kept far away from
the charger to prevent the robot from being knocked or entangled
during cleaning.
Operating instructions
Operating information
37