PALSON Diábolo Plus Modo De Empleo página 35

GB
Operating guide
Start/Stop
Setting the current
date and time
Setting cleaning time
Setting continuous
cleaning
Error display
Speed selection
Turn on the machine; when you press the Start/Stop button, the machine will
start working, and pressing it again will turn the machine off.
1. Turn on the machine.
2. When you press " ", the current time number 88 will start flashing.
Use the ▲▼ buttons to select time.
3. When you press the ◄ ► buttons, the minute indicator will start flashing.
Use ▲▼ to set the minute.
4. Then press ◄ ► to set the hour.
5. To set the day of the week, press one of the buttons SUN, MON, TUE,
WED, THU, FRI or SAT.
6. Once you have configured the setting, press OK.
7. Pressing the on button during configuration cancels the setting.
Setting days of the week for cleaning:
1. Turn on the machine.
2. Pressing " ", SUN, MON, TUE, WED, THU, FRI or SAT will appear.
3. Press any given day of the week, several days or all days to set the device
to clean on any one, several days or every day of the week. The current
date will flash.
Setting the cleaning time:
4. Press " "; the number 88 will start flashing. Use the ▲▼ buttons to
select your desired hour of cleaning.
5. Press ◄ ►, again; the number 88 in minutes will start flashing. Use ▲▼
to set your desired minutes of cleaning.
6. Once you have configured the setting, press OK.
7. Pressing the on button during configuration cancels the setting.
Setting continuous cleaning
If you have a large house, you can use function "
in which the robotic vacuum will start cleaning when fully charged and return
to the docking station automatically before its battery is flat.
1. Press " "; the "
start flashing.
2. Once you have configured the setting, press OK.
3. The robotic vacuum will start cleaning automatically when the battery
is charged (charging time is about 5 or 6 hours).
Note: The continuous cleaning and scheduled cleaning functions
cannot be used at the same time!
If you are certain that there is an error with the device, with the remote control
within range, press this function button on the remote. The screen will show
an error code which you should be able to clear by following instructions in
the troubleshooting section.
Press "FAST" or "SLOW" to select either fast or slow cleaning. The machine will
automatically save your selection for future use.
Operating information
" indicator on the remote control LCD screen will
" (continuous cleaning),
35