Lexmark OptraImage 242 Guía De Preparación página 29

Replacing the ADF
.
OptraImage Setup Guide
pad assembly
If you experience problems with papers double-feeding
through the ADF, the pad assembly may be worn out and
need to be replaced.
1
Turn off the scan unit and disconnect the power supply.
2
Open the ADF front cover
3
Remove the old ADF detachable pad assembly by
squeezing and pulling out the upper part of the pad clamp
4
Hold the upper part of the new clamp, squeeze, and place
it gently in the pad holder.
5
Close the ADF.
6
Reconnect the power supply and turn the scan unit back
on.
29