Storage; Cleaning And Maintenance - Vornado AC350-EU Guía Para El Propietario

6. Replace Front Panel by positioning the Panel slightly above the unit
and aligning the tabs of the Front Panel with the holes in the unit
(A). Gently press the Front Panel down, sliding into the tab slots
and allowing the magnets to securely lock the Front Panel in place.
A
±
±
SAFETY SHUT-OFF FEATURE
For your protection, the unit is designed to operate only if the Front
Panel is in place. Do not attempt to override this safety feature. If,
after the Front Panel has been reinstalled, the unit does not operate,
remove and reinstall the Front Panel to assure proper placement.
16 English
7. To reset the CARBON filter notification - press and hold the
REPLACE CARBON button for 3 seconds. To reset the HEPA
filter notification, press and hold the REPLACE HEPA button for 3
seconds. The light will turn off confirming the indicator is reset.
Press for 3 seconds
Note: Do not operate the Air Purifier without Vornado Carbon and
Vornado HEPA Filters in place.

STORAGE

Follow the steps listed below when you are ready to store your unit.
1. Unplug power cord and bundle loosely.
2. Lift unit with both hands, using hand holds. (Refer to USER TIPS)
3. Cover, or place back in retail carton if available. This will prevent
the unit from accumulating dust overtime.
4. Store unit in a cool and dry location.

CLEANING AND MAINTENANCE

HOW TO CLEAN
Because large volumes of air pass through your Vornado Air Purifier
each day, it will need regular cleaning.
1. Unplug the unit before cleaning.
Note: Do not use gasoline, thinners, solvents or other chemicals for
cleaning.
2. Wipe down with a soft, damp cloth. (Figure 1)
3. Dust or vacuum the interior and along the sides. It is recommended
to clean the interior when the Filters are changed. (Figure 2)
Fig. 1 Fig. 2
Other Maintenance
The motor is permanently lubricated so it needs no service. No other
serviceable parts, other than Filters, are contained within the unit.
English 17