Preventative Maintenance - Napa CARLYLE TOOLS 791-6455 Instrucciones De Operación

ITEM NO PART NO
1
2
3
4 RS645504
5
6
7
Not Shown RS7916455PLK
Note: Only items identified by part number are available for purchase.

PREVENTATIVE MAINTENANCE

This is the safety alert symbol used for the PREVENTATIVE MAINTENANCE section of this manual to alert you to potential personal
injury hazards. Obey all instructions to avoid possible injury or death.
1. Always store the jacks stands in a well protected area where they will not be exposed to inclement weather, corrosive vapors,
abrasive dust, or any other harmful elements. The stands must be cleaned of water, snow, sand, grit, oil, grease or other foreign
matter before using.
2. Every jack stand owner is responsible for keeping the stand labels clean and readable. Use a mild soap solution to wash external
surfaces of the stand. Contact NAPA for a replacement label if your stand's label is not readable.
3. Inspect the stands before each use. Do not use the stands if any component is cracked, broken or bent. Do not use the stand if it
has loose or missing hardware or components, or is modified in any way. Take corrective action before using the stand again.
Premature wearing or damage to components caused by loose or missing hardware is not eligible for warranty consideration.
OWNER/USER RESPONSIBILITY
The owner and/or user must have an understanding of the manufacturer's operating instructions and warnings before using this jack
stands. Personnel involved in the use and operation of equipment shall be careful, competent, trained, and qualified in the safe operation
of the equipment and its proper use when servicing motor vehicles and their components. Warning information should be emphasized and
understood. If the operator is not fluent in English, the manufacturer's instructions and warning shall be read to and discussed with the
operator in the operator's native language by the purchaser/owner, making sure that the operator comprehends its contents. Owner and/or
user must study and maintain for future reference the manufacturers' instructions. Owner and/or user is responsible for keeping all warning
labels and instruction manuals legible and intact. Replacement labels and literature are available from the manufacturer.
WARRANTY
Please contact your local NAPA Auto Parts Store for details on warranty.
791-6455
OPERATING MANUAL FOR 791-6455
DESCRIPTION
Bolt M8 x 25
Base
Sleeve
Lock Pin (incl. item 5,6)
Key Ring
Chain
Saddle and Post
Label Kit
QTY
1
1
1
1
2
1
1
3
1
4
7
4
5
6
2
1
Rev. 04/10/20