WEG K-PT100 Guia De Instalacion página 5

In order to install the PT106 board correctly, follow the steps showed in the
figure 2:
a) with the SSW-06 powered off, open the front cover;
b) insert the plastic standoff on the CCS6 control board;
c) remove the screw;
d) carefully, fit the PT106 board on the CCS6 board into the XC6 connector;
e) fit in the plastic standoffs;
f) insert and tighten the board securing screw.
a
d
Installation Guide of the Temperature Transducers Kit K-PT100
Figure 2 a to f - K-PT100 optional kit installation
b
e
c
f
5