Sound On/Off; Pump Mode; Milk Volume Mode - The First Years Breastflow Memory Pump Manual De Instrucciones

Memory Pump

SOUND On/Off

• Each time a button is pressed the pump unit will beep.
• Touching the speaker icon located in the bottom right
corner of the screen will turn the beep off. Touch the
icon one more time to turn the sound back on.
• If the beep is turned off the screen will flash when a
button is pressed.

PUMP mode

1. Press the PUMP tab to begin a
pumping session.
3. Adjust the suction and speed settings during
the pumping session by using the up and down
arrows.
NOTE: Suction levels = 1-8 Speed levels = 1-3
14 get ready for thefirstyears.com TM
SOUND SOUND
ON OFF
2. Press the START button and the pump timer begins.
NOTE: The pump will always turn on at setting
1 for both suction and speed.
NOTE: If you press the MILK VOLUME tab while you are
pumping the following message appears:
"You can enter the MILK VOLUME after pumping."
4. Press STOP to end the pumping session.

MILK VOLUME mode

1. Select Milk Volume Tab
2. Enter the amount of milk pumped once the pump session is complete.
3. Input volume of milk expressed from the left and right breast by pressing the up/down arrows.
* Display for OZ (Ounces) setting * Display for ML (Milliliters) setting
4. The pump session number, month, day, time , milk volume (L &R), suction, speed and pump
session duration will automatically be saved under Session #1 of the HISTORY tab.
5. Push the power button to turn unit off.
NOTE: Unit turns off automatically after 3 minutes when pump is left unattended (pump
motor is off and no touch screen activity).
5. Press the HISTORY tab. The HISTORY screen
displayed specifies – date, time, suction, speed
and duration of pump session.
3. Select SAVE once you have
entered the milk volume.
get ready for thefirstyears.com
TM
15