Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MAKING A TAPE RECORDING
This unit allows you to make direct recordings from the radio or CD player to a blank cas-
sette. An automatic recording volume level control (ALC) circuit will automatically control
the volume level of your recordings to prevent distortion.
1
Open Surface Side
Open the cassette door and insert a
good quality blank cassette tape into
Full Reel on Right
the slots on the door, with the open
end facing up and the full reel on the
right side. Close the cassette door.
3
When you are ready to begin recording,
press the RECORD (Q) button. The PLAY
(
) button will also engage. The tape will
begin moving and all of the material from your
√
selected source will be recorded on the tape.
5
1
When you are finished recording,
press the STOP/EJECT (
stop the tape.
OPERATION (CONTINUED)
3
) button to
r
2
Slide the Function switch to select the
function you wish to record, either CD
or Radio, and operate that function
according to its own instructions.
4
To avoid recording unwanted material,
such as radio commercials, use the
PAUSE (p) button to stop the recording
temporarily. Release the PAUSE (p)
button to begin recording again.
6
3
2
1
If you wish to listen to your recording immedi-
ately, press the REWIND (
the tape rewinds to the beginning, then press
the STOP/EJECT (
FUNCTION switch 3 to select TAPE/OFF then
press the PLAY (√) button 4 to begin playback.
15
1
1
3
4
) button 1 until
®®
) button 2. Slide the
r
Tabla de contenido
