Metadata Activation; Network Scanner Tool (Nst) Setup; Ftp Destination Setup - Sharp MX-AMX1 Manual De Instrucciones

METADATA ACTIVATION

To perform Metadata Delivery, the machine administrator must activate the metadata feature beforehand by
entering your product key on the operation panel on the machine. The procedure for activating metadata
transmission at the machine is shown below for each model type. This is usually done by the installing dealer.
To activate the Application Integration Module:
[For MX models:]
Follow the steps shown
Authentication Setting] has not been activated.
(For information on
Setting", see the System Setting Guide.)
1 Press the [SYSTEM SETTINGS] key.
2 Touch the [Admin Password] key.
3 Touch the [Password] key and enter
the administrator password.
Touch the [OK] key.
4
Touch the [Product Key] key.
5
You may have to scroll down the screen to show
this key.
Touch the [Application Integration
6
Module] key.
Enter your product key.
7
NOTE
If your model is an MX model, the product key can be entered from the Web pages. For more information, see
[Help] at the top right corner of the Web pages.
The [Application Integration Module] key does not appear when the network scanner function has not been activated.

NETWORK SCANNER TOOL (NST) SETUP

By default NST create new file names on the computer. When NST is used to route metadata files to a
third-party application, this setting should be kept off because the machine-created filename is used as
a cross-reference between the image and XML file. (When setting the file name in [Send Settings], to
ensure that a previously existing file on a computer is not overwritten by a transmitted file of the same
name, be sure to configure the file name so that name duplication cannot occur; for example, by
including a unique extension (the date, etc.) in the generated file name. If the file name setting is left
blank, the machine will automatically generate a file name that is unique.)
It is recommended that you use the accompanying network scanner tool to receive metadata files. For
more information, see the Network Scanner Tool User's Guide.

FTP DESTINATION SETUP

If you are not using NST, FTP destinations can be configured to send data directly to an FTP server. FTP
destination types are configured in the Web pages. For detailed information on configuring new FTP
destinations, see [Help] in the Web pages.
below when [User
"User Authentication
[For AR models:]
Press the [Custom Settings] key on
1
the operation panel.
2 Touch the [Key Operator Programs]
key.
Enter the key operator code.
3
4 Touch the [Product Key] key.
You may have to scroll down the screen to show
this key.
Touch the [Application Integration
5
Module] key.
Enter your product key.
6
3
ENGLISH