Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Wipe with a dry cloth moistened with soap and water. Dry thoroughly. Unplug the power
before cleaning. Do not allow water inside.
PARTS LIST
1.- Shroud ring
2.- Front cover
3.- Fastener for fan blade
4.- Fan blade
5.- Fastener for cover
6.- Back cover
7.- Output shaft
8.- Joint
9.- Back panel
10.- Decorative panel
11.- Up-Down tube
12.- External joint
13.- Support tube
14.- Decorative cover
15.- Base
16.- Head rotating button
ASSEMBLY
1.- Place the rear grid (6) on the motor shaft (7). Check that the grid is positioned in the correct
direction. Fasten with the retaining nut (5) and pass the blades (4) along the shaft (7). Tighten
with the retaining nut (3). Install the front grille (2) and fasten it to the rear grid using the
closing ring (1).
2.- Attach the main bar (13) to the base (15). Loosen the height adjuster (12) and adjust the
bar to the desired one.
Tabla de contenido
