Manual Mode - Saci [e]joy Manual De Instalación Y Mantenimiento

The objective of this screen is to test the pump operation, at a specific speed, for a controlled time, to correctly select the operating speeds of the
cycles in section 2 of the settings menu.
Press F2 to activate the pump initially for 2 minutes at the maximum frequency of the pump. Each time you press the F2 key increases the
operating time on a scale of 2 minutes, 15 minutes, 30 minutes, 1 hour, 2 hours, 4 hours or 8 hours. At any time, by pressing the F1 key, you can
stop the pump operation.
Every time you press the keys (
Par. Description
10.01 MODULE TEMPERATURE
10.02 ANALOGUE SIGNAL
10.03 VOLTAGE HOURS
10.04 HOURS OF WORK
10.05 ENERGY METER
10.06 DIGITAL INPUT 1
10.07 DIGITAL INPUT 2
10.08 RELAY 1 OUTPUT
10.09 RELAY 2 OUTPUT
11.00 SOFTWARE VERSION
11.01 POWER CONSUMED BY PUMP

9. MANUAL MODE

9 . M A N U A L
0 r p
C O
F E 1 0 . 0 A A
o l e s
S a l i r
) or ( ) you increase or decrease, respectively, the operating speed of the pump by 10 rpm.
10. DISPLAY
Units.
Default
ºC
mA
Hours
Hours
kWh
0
0
0
0
W
( 0 s )
- - B
m - a R
N ( 5 . 0 A
A A S A
VALUES
Min. Max.
Shows the current temperature of the power module.
If the temperature is very high, the speed variator
itself will limit the speed of the pump to prevent the
electronics of the speed variator being damaged.
Shows the value of the pressure transducer reading
4 20
in mA.
Indicates the hours the pump has been connected to
the electricity grid regardless of whether it has been
running or not.
Indicates the hours of pump operation.
Indicates the pump consumption in kWh.
Indicates whether input 1 is enabled or not; if it is
0 1
enabled, the reason for this.
Indicates whether input 2 is enabled or not; if it is
0 1
enabled, the reason for this.
Indicates whether relay 1 is enabled or not; if it is
0 1
enabled, the reason for this.
Indicates whether relay 2 is enabled or not; if it is
0 1
enabled, the reason for this.
Indicates the version of the software of the control
panel (screen) and the power panel (aluminium
radiator).
Indicates the instantaneous power consumed by the
pump.
30
I
N F
) A
O N
Notes
EN