Tyco KANTECH Intevo-CMP-1TB Guía De Configuración Rápida página 6

4
Rack Mount Installation (Not included; only for
Advanced model)
Precautions
•
Elevated Operating Ambient - If installed in a closed or multi-unit
rack assembly, the operating ambient temperature of the rack
assembly may be greater than the room temperature. Therefore,
consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature
(Tma) specified by the manufacturer.
•
Reduced Air Flow - Installation of the equipment in a rack should be
such that the amount of air flow required for safe operation of the
equipment is not compromised.
•
Mechanical Loading - Mounting of the equipment in the rack should
be such that an hazardous condition is not achieved due to uneven
mechanical loading.
•
Circuit Overloading - Consideration should be given to the
connection of the equipment to the supply circuit and the effect
that overloading of the circuits might have on overcurrent
protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing this
concern.
•
Reliable Earthing - Reliable earthing of rack-mounted equipment
should be maintained. Particular attention should be given to
supply connections other than direct connections to the branch
circuit (e.g. use of power strips).
Connections
Proceed with the following connections:
1-
Connect your local network cable to ETH1.
2-
Connect your camera network cable to ETH2.