Safety Instructions - Tyco KANTECH Intevo-CMP-1TB Guía De Configuración Rápida

Copyright
Under copyright laws, the contents of this manual may not be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-readable form,
in whole or in part, without prior written consent of Tyco International Ltd.© 2012 and
its respective companies. All Rights Reserved.
Notice of Use
•
Please read this manual carefully before use. All requirements should be followed before
using this server.
•
We reserve the right to change the product and manuals without prior notice.
•
Keep this document for future reference.
•
The server is for indoor use only.
•
Keep the server and other accessories in a dry environment.
•
We are not responsible for any damage caused by inappropriate use.
•
The Installer shall instruct the USER regarding ALL THE SAFETY INSTRUCTIONS that shall be
observed during the use of the equipment.
Warranty
•
The server will be sold with a warranty period of 3 years starting the day of purchase by
the dealer / installer.
•
The server manufacturer must offer this warranty as any defective unit will be returned to
them for replacement.
Important:
•
This Intevo device shall be used and installed within an environment that provides the
pollution degree max. 2 and overvoltages category II NON HAZARDOUS LOCATIONS,
indoor only. The equipment is FIXED or DESKTOP and CORD CONNECTED and is designed
to be installed by service persons only; [a service person is defined as a person having the
appropriate technical training and experience necessary to be aware of hazards to which
that person may be exposed in performing a task and of measures to minimize the risks to
that person or other persons.]
•
There is no ON/OFF SWITCH for the power supply. The AC power supply coupler serves as
a means of disconnection from the supply mains.

Safety Instructions

•
Select a place that is free from vibration and shock.
•
Do not locate this product where persons can walk on the cables.
•
Do not connect the server to electrical outlets on the same circuit as large appliances.
•
Do not select a place that exposes the server to direct sunlight, excessive heat, moisture,
vapors, chemicals or dust.
•
Do not install this equipment near water (e.g., bathtub, wash bowl, kitchen/laundry sink,
wet basement, or near a swimming pool).
•
Do not install this equipment and its accessories in areas where there is a risk of
explosion.
•
Do not connect this server to electrical outlets controlled by switches or automatic timers.
•
AVOID sources of radio interference.
•
AVOID setting up the equipment near heaters, air conditioners, ventilators, and/or
refrigerators.
•
Ensure that cables are positioned so that accidents can not occur. Connected cables must
not be subject to excessive mechanical strain.
1